Skip to main content
Trade supplier of professional cleaning equipment · All prices ex VAT
Foam & Chemical Systems

Foam & Chemical Systems

546 products
546 productsHelp choosing? 015395 66193
Need help choosing? Call 015395 66193

Shop by type

9 types · swipe for more
546 products
Page 13 of 16

About Foam & Chemical Systems

Foam and chemical application equipment for commercial, industrial, food and agricultural cleaning. The range covers pressure washer foam systems, including Suttner ST160 and ST167 foam injectors, ST72 and ST75 foam lances and heads, snow foam bottle lances and foam guns, and standalone equipment that works without a pressure washer: manual, compressed-air, electric and battery-powered foamers and sprayers.

For mobile foam units, battery-powered foamers, doorway foam systems and central foam stations, see our FOAMit foaming and hygiene equipment. For pressure tank foamers, hand sprayers and knapsack sprayers, see Standalone Foamers and Sprayers. Need help choosing an injector size or system? Call 015395 66193 or email sales@flowjet.co.uk.

How foam injection works

Foam is produced using an injector on the outlet of the pressure washer. When low pressure is selected, the venturi creates suction and draws in the chemical. We can calculate the correct injector size for your flow and pressure.

We also stock Suttner bypass injectors that accept compressed air. This method is typically used in the food industry for the best cleaning results.

Foam lance with a bottle

The foaming agent is injected at the end of the lance from a 1 litre or 2 litre bottle, so it can run out quickly when cleaning a large area. Jet orifice sizes from 1.25 to 2.1 are available to suit your flow and pressure.

Foam lance with an air injector

An ST72 or ST75 foam lance with an air injector works with a foam injector on the outlet of the pressure washer. The foam lance has a large nozzle and fits to the pressure washer gun, keeping the line pressure low enough for the venturi to draw in the chemical. This system is preferred by industrial and commercial customers.

Recommended set-up

  • Hose length: ideally no more than 20m
  • Hose bore: 3/8" or larger
  • Flow: 10–40 L/min
  • Pressure: 20–250 bar