TecPro ST83 Hand-Held Cold Fogger with Bottle

The TecPro ST83 is a compressed-air-operated, hand-held cold fogger supplied with a bottle and two interchangeable nozzles. It produces a fine mist with a stated droplet size of approximately 30 microns for applying a suitable fogging solution across rooms, vehicles and hard-to-reach areas.

The swirl nozzle is intended for smaller rooms and vehicle interiors. The straight nozzle provides a longer throw for larger spaces or targeted application. Suitable uses depend on the liquid selected and its instructions; fogging alone does not establish disinfection, pest-control or odour-removal performance.

An air compressor is required. Correct air-pressure adjustment matters because both insufficient and excessive pressure can prevent the venturi from drawing liquid and producing an effective mist.

Key Features

• Hand-held cold fogger supplied with bottle
• Approximately 30-micron spray droplets
• Swirl and straight nozzles included
• Compressed-air operation
• Series 25 probe air inlet
• Stainless steel material listed in the supplied specification
• Made in Germany

Technical Specifications

Nozzle Air-Pressure Settings

Specification check before publishing: The source also lists “Bar: 3”, which conflicts with the nozzle guidance extending to 4 and 5 bar. Confirm whether 3 bar is a general operating figure or a maximum equipment rating before presenting those nozzle ranges as operating instructions. The listed 200 LPM also needs confirmation as air consumption or another flow measurement.

Suitable Applications

With a liquid approved for the intended use, the ST83 can be considered for fogging vehicle interiors, rooms and other areas where a fine mist is required. Always follow the liquid manufacturer’s directions for dilution, application, ventilation and re-entry.

For advice on the ST83, compatible air connections or choosing suitable fogging equipment, contact:

Flowjet Cleaning Equipment LTD
Unit 4, Gatebeck Farm
Gatebeck, Kendal
LA8 0HW
United Kingdom
Telephone: 015395 66193
Email: sales@flowjet.co.uk