Shop popular
Dirt Driver WM150/15HC Wall Mounted Electric Pressure Washer, 400V, 150 Bar, 15 LPM, Timed Shutdown
Dirt Driver WM150/15HC wall mounted cold water electric pressure washer for 400V three-phase supplies, delivering 150 bar at 15 litres per minute. A close-coupled 4kW Lafert motor at 1450 rpm drives a Hawk three-piston ceramic plunger pump with stainless steel discharge valves.
A flow-actuated unloader valve and timed total shutdown are standard: when the trigger is released the pump goes into bypass, and if the trigger is not used again within about 4 to 8 minutes the machine switches itself off and is restarted at the power switch, so it cannot restart unexpectedly from a leaking hose or fitting. An automatic trapped pressure system that restarts from the gun is available as an option. The lockable, ventilated steel cabinet has a bar heater for frost protection, a 9 litre break tank to Category 5 backflow prevention requirements, 24V switching and wall mounting brackets.
For technical advice or help choosing a part, call 015395 66193 or email sales@flowjet.co.uk.
Dirt Driver WM150/15HC wall mounted pressure washer, 400V, 150 bar, 15 litres per minute, with timed shutdown.
Flow: 15LPM
Pressure: 150 Bar
Power Supply: 415V/3phase
Hawk Three Piston Ceramic Plunger Pump
Stainless Steel Discharge Valves
High Pressure or Low-Pressure Unloader Valve
Close Coupled Lafert Motor and Hawk Pump
24v Switching
Auto Stop/Start operated from the gun or Timed Shutdown
Wall Mounting Brackets Included as standard
Heater to reduce the risk of frost damage
74 x 50 x 39.5