R+M Suttner ST168 By-Pass Inj 1/2" F SS + 2.1mm Nozzle, 350 Bar, 80 LPM

ST168 easyfoam365+ foam injector from R+M Suttner in stainless steel, 2.1mm injector size, with a built-in compressed air module. The compressed air makes the foam inside the injector, so no air-intake foam lance is needed, and it suits low-pressure, high-volume systems such as factory plant rooms running at around 40 litres per minute and 45 bar. It is used in wall-mounted washdown systems for food processing, agriculture and transport cleaning.

It works on high and low pressure systems and can run from mains water pressure of at least 5 bar. A lever switches between chemical and rinse mode, and chemical dosing is set with the nozzle inserts supplied. It has a 1/2" BSP female inlet and outlet and is rated to 350 bar, 80 litres per minute and 100°C. A DN12 hose with a 1/2" inlet and outlet wash gun is recommended to stop the foam collapsing on the way to the gun. On vertical surfaces, apply foam from the bottom upwards to avoid overlap. It weighs 1.25kg.

Specification

Before installation: Check your pump's flow and working pressure against our foam nozzle size chart, check the connection threads using our BSP thread size chart, and make sure the pressure and temperature ratings suit your system.

For product advice, contact Flowjet Cleaning Equipment LTD on 015395 66193 or email sales@flowjet.co.uk.

Flowjet Cleaning Equipment LTD
Unit 4, Gatebeck Farm
Gatebeck, Kendal
LA8 0HW
United Kingdom

For help checking compatibility with your pressure washer or cleaning system, contact Flowjet Cleaning Equipment.