LS10 Foam Lance – 1/4" BSP F Inlet, 1.5mm Nozzle, 200 Bar

Overview

LS10 snow foam lance made in Italy by PA. It switches between a foam spray and a rinse spray, so a vehicle can be foamed and rinsed with the same lance, and the mesh inside is easy to reach for cleaning.

Snow foam loosens surface dirt as a pre-wash and can be left on for 5 to 15 minutes before rinsing. Rinse the mesh regularly to keep the foam quality. The lance has a 1/4" BSP female inlet and a 1.5mm nozzle and is rated to 200 bar, 25 litres per minute and 65°C.

Specification

Sizing help

To choose the right nozzle size, see our foam nozzle size chart.

For technical advice or help choosing a part, call 015395 66193 or email sales@flowjet.co.uk.