Annovi Reverberi WHW32.20 High Temperature Pump, 200 Bar, 32 LPM, 1450 RPM

Overview

Annovi Reverberi WHW32.20 three piston high temperature pump for hot water pressure washers and industrial systems, delivering 32 litres per minute at 200 bar at 1450 RPM with water up to 85°C, and needing 15hp to run at full pressure.

The body, end plate and side covers are die-cast aluminium with an electro-phoresis protective coating, and the pressed nickel-plated brass head adds protection in moderately aggressive environments. It has one-piece ceramic pistons, a double PTFE gasket system to minimise water leaks, a heat-treated pressed steel shaft and oversized friction bearings.

Specification

Repair kits

From Annovi Reverberi parts list 22989 (WHW 32.20 N, series 194):

• Valve kit (A): 2780
• Piston kit, 22mm (B): 1891
• Oil seal kit (C): 2873
• Water seal kit, 22mm (E): 42402
• Support ring kit, 22mm (G): 42403

Sizing help

To match a motor to your pump, see our electric motor sizing guide.

For technical advice or help choosing a part, call 015395 66193 or email sales@flowjet.co.uk.