Annovi Reverberi WHW21.15 High Temperature Pump, 150 Bar, 21 LPM, 1450 RPM

Overview

Annovi Reverberi WHW21.15 three piston high temperature pump for hot water pressure washers and industrial systems, delivering 21 litres per minute at 150 bar at 1450 RPM with water up to 85°C, and needing 7.5hp to run at full pressure.

The body, end plate and side covers are die-cast aluminium with an electro-phoresis protective coating, and the pressed nickel-plated brass head adds protection in moderately aggressive environments. It has one-piece ceramic pistons, a double PTFE gasket system to minimise water leaks, a heat-treated pressed steel shaft and oversized friction bearings.

Specification

Repair kits

From Annovi Reverberi parts list 22987 (WHW 21.15 N, series 194):

• Valve kit (A): 2780
• Piston kit, 22mm (B): 1891
• Oil seal kit (C): 2873
• Water seal kit, 22mm (E): 42402
• Support ring kit, 22mm (G): 42403

Sizing help

To match a motor to your pump, see our electric motor sizing guide.

For technical advice or help choosing a part, call 015395 66193 or email sales@flowjet.co.uk.