Shop popular
FOAMit Pre-Mix Electric Mist Unit
The FOAMit MU-JR-PSGN130-H50 is a pre-mix mist unit with a built-in 1.5 hp electric air compressor, so it can mist where compressed air is not available. It draws pre-mixed solution and applies it through a handheld wand on 15.2m (50ft) of lightweight twin-line tubing, producing a 15-micron droplet at 3.4 bar.
The unit is compact and portable, plugging into a 120 V AC supply.
For help choosing the right unit or seals for your chemical, call 015395 66193 or email sales@flowjet.co.uk.
Power: Electricity, built-in 1.5 hp air compressor
Chemical pickup: Pre-mixed solution
Products drawn: One
Flow rate: Approx. 265 ml/min (8.96 US fl oz/min) at 3.4 bar, static
Reach: 0.9–1.5m (3–5ft)
Droplet size: 15 microns at 3.4 bar (50 psi)
Coverage: 1 litre of solution covers approx. 28.3m³ (1,000 cu ft)
Operating air pressure: 3.4–5.5 bar (50–80 psi)
Electrical supply: 120 V AC, 60 Hz, 8.5 A (GFCI-protected outlet)
Liquid temperature: 4.4–37.8°C
Discharge hose: 15.2m (50ft) twin-line tubing, 6.4mm (1/4") OD
Wand: Polypropylene trigger handle, polypropylene mist nozzle with Kynar tip
Nozzles: 1 × pneumatic mist nozzle
Suction line: 1.8m (6ft) clear hose, 6.4mm (1/4") ID
Pump seals: Santoprene, Viton or Kalrez
Part number: MU-JR-PSGN130-H50