Shop popular
FOAMit Pre-Mix Electric Foam Unit
The FOAMit FI-JR is a pre-mix foam unit with an on-board electric air compressor, bringing consistent foam to areas without compressed air. It draws pre-mixed solution and applies foam through 7.6m (25ft) of coiled twin-line tubing and a trigger handle with a 65° fan tip, with a reach of 1.2–1.8m.
The compact unit plugs into a 120 V AC supply, and the lightweight coiled hose stays tangle-free.
For help choosing the right unit or seals for your chemical, call 015395 66193 or email sales@flowjet.co.uk.
Power: Electricity, on-board air compressor
Chemical pickup: Pre-mixed solution
Products drawn: One
Output: 22.7 l/min of foam
Flow rate: 3.8 l/min
Reach: 1.2–1.8m (4–6ft)
Electrical supply: 120 V AC, 60 Hz, 10 A (GFCI-protected outlet)
Liquid temperature: 4.4–37.8°C
Discharge hose: 7.6m (25ft) coiled twin-line tubing, 6.4mm (1/4") OD
Wand: Polypropylene trigger handle, 65° fan tip
Suction line: 1.8m (6ft), 6.4mm (1/4") ID
Pump seals: Santoprene, Viton or Kalrez
Part number: FI-JR
Supplied with: Complete unit with discharge hose and wand, user manual
Chemical compatibility: Chemicals must be suitable for this application and compatible with the unit materials and pump seals. Check the chemical's SDS.