Shop popular
FOAMit High Concentration Foam Unit with All-Poly Fittings
The FOAMit FI-WC-11-AP is a wall-mounted high-concentration foam unit powered by compressed air, with all-poly fluid fittings resistant to many acid products. It draws concentrated product and dilutes it with mains water at 1:1 to 16:1, applying foam through a 15.2m hose and 813mm polypropylene wand with a reach of 4.6–6.1m.
It regulates incoming water pressure, so foam quality and dilution stay consistent regardless of fluctuations in facility water pressure.
For help choosing the right unit or seals for your chemical, call 015395 66193 or email sales@flowjet.co.uk.
Power: Compressed air
Chemical pickup: Concentrated product
Products drawn: One
Output: 75.7 l/min of foam
Flow rate: 6.1 l/min
Reach: 4.6–6.1m
Dilution ratio: 1:1 to 16:1 (water:chemical)
Air supply: 2.8–5.5 bar (40–80 psi), 141.6–283.2 l/min (5–10 cfm)
Water pressure: 0.7–6.9 bar (10–100 psi), backflow prevention required
Liquid temperature: 4.4–37.8°C
Discharge hose: 15.2m (50ft), 19mm (3/4") ID
Wand: 813mm (32") polypropylene, zero-degree tip, polypropylene ball valve
Suction line: 2.4m (8ft) clear braided hose, 12.7mm (1/2") ID
Pump seals: Santoprene, Viton or Kalrez
Fittings: All-poly
Mounting: Wall mounted
Part number: FI-WC-11-AP
Supplied with: Control box assembly, discharge hose and wand, mounting hardware, stainless steel hose rack, metering tip kit for foam injector, user manual
Chemical compatibility: Chemicals must be suitable for this application and compatible with the unit materials and pump seals. Check the chemical's SDS.