Shop popular
FOAMit High Concentration Foam Unit with 2-Product Selector and All-Poly Fittings
The FOAMit FI-WC-11-AP-2PSEL is a wall-mounted high-concentration foam unit powered by compressed air. It draws from two concentrated products, one at a time, switched by a 3-way selector ball valve, and dilutes them at 1:1–16:1 (water:chemical).
Foam is applied through a 15.2m hose and 813mm polypropylene wand with a reach of 4.6–6.1m. Incoming water pressure is regulated for consistent foam quality, and all-poly fluid fittings resist many acid products.
For help choosing the right unit or seals for your chemical, call 015395 66193 or email sales@flowjet.co.uk.
Power: Compressed air
Chemical pickup: Concentrated product
Products drawn: Two, one at a time
Output: 75.7 l/min of foam
Flow rate: 6.1 l/min
Reach: 4.6–6.1m
Dilution: 1:1–16:1 (water:chemical)
Air supply: 2.8–5.5 bar (40–80 psi), 141.6–283.2 l/min (5–10 cfm)
Water pressure: 0.7–6.9 bar (10–100 psi), backflow prevention required
Liquid temperature: 4.4–37.8°C
Discharge hose: 15.2m (50ft), 19mm (3/4") ID
Wand: 813mm (32in) polypropylene, zero tip, polypropylene ball valve
Suction line: 2.4m (8ft) clear braid hose, 12.7mm (1/2") ID, one per product
Pump seals: Santoprene, Viton or Kalrez
Fittings: All-poly
Mounting: Wall
Part number: FI-WC-11-AP-2PSEL
Supplied with: Control box assembly, discharge hose and wand, mounting hardware, stainless steel hose rack, metering tip kits for foam injector, user manual
Chemical compatibility: Chemicals must be suitable for this application and compatible with the unit materials and pump seals. Check the chemical's SDS.