Shop popular
FOAMit EZBlend Foam Unit
The FOAMit FI-EZB-15NV EZBlend foam unit is part of the Sterilex EZBlend system. Powered by compressed air, it draws two concentrated Sterilex products simultaneously and dilutes them on the fly with water from a 56.8 litre on-board tank, so there is no pre-mixing and no wasted solution.
It is pre-set to the Sterilex labelled rate of 1:1:10 to 1:1:8 and applies foam through a 9m hose and 305mm stainless steel fan-tip wand. Two 18.9 litre jugs of concentrate make 170–189 litres of solution, so refills are less frequent.
For help choosing the right unit or seals for your chemical, call 015395 66193 or email sales@flowjet.co.uk.
Capacity: 56.8 litres water; up to 37.9 litres concentrate
Power: Compressed air
Chemical pickup: Concentrated product
Products drawn: Two, simultaneously
Output: 56.8–75.7 l/min of foam
Flow rate: 7.6 l/min
Reach: 3–3.7m
Dilution: 378.5–473.2 ml : 378.5–473.2 ml : 3.8 litres (chemical A : chemical B : water)
Air supply: 2.8–5.5 bar (40–80 psi), 141.6–283.2 l/min (5–10 cfm)
Liquid temperature: 4.4–37.8°C
Discharge hose: 9m (30ft), 19mm (3/4") ID
Wand: 305mm stainless steel, ball valve, 65° fan tip, stainless quick connects
Suction line: 2 × 1.2m (4ft) transparent lines (blue and green), 6.4mm (1/4") ID, quick-disconnect jug fittings
Pump seals: Viton
Wheels: 2 × 254mm non-marking wheels, 2 × 127mm casters (one locking)
Part number: FI-EZB-15NV
Supplied with: Complete foam unit with discharge hose and wand, 2 × 18.9 litre chemical jugs with caps and suction fittings, user manual
Chemical compatibility: This unit is configured specifically for use with Sterilex liquid products.