Shop popular
FOAMit Concentrate Foam and Sanitize Unit
The FOAMit FISP-WC is a wall-mounted concentrate foam and sanitise unit powered by compressed air. Separate foam and spray systems share one enclosure but no components, each drawing its own concentrate and diluting it with mains water: foam at 14:1–320:1 through a 15.2m hose and stainless steel wand, and sanitiser at up to 640:1 through a 15.2m hose and spray gun.
Both functions can run independently or at the same time with no cross-contamination, and incoming water pressure is regulated for consistent dilution and foam quality.
For help choosing the right unit or seals for your chemical, call 015395 66193 or email sales@flowjet.co.uk.
Power: Compressed air
Chemical pickup: Concentrated product
Products drawn: One for foam, one for spray
Output: Foam 75.7–170.3 l/min; spray 7.6 l/min with ST2520SS tip, 15.1–18.9 l/min with ST2550SS tip
Flow rate: Foam 7.6 l/min; spray 7.6 l/min (ST2520SS) or 15.1–18.9 l/min (ST2550SS)
Reach: Foam 7.6–9.1m (25–30ft); spray 3–3.7m (10–12ft)
Dilution/ratio: Foam 14:1–320:1; spray 34:1–640:1 (ST2520SS) or 24:1–640:1 (ST2550SS)
Air supply: Foam 2.8–5.5 bar (40–80 psi), 141.6–283.2 l/min (5–10 cfm); spray 2.8–5.5 bar (40–80 psi), 56.6 l/min (2 cfm)
Water pressure: 0.7–6.9 bar (10–100 psi), backflow prevention required
Liquid temperature: 4.4–37.8°C
Discharge hose: Foam 15.2m (50ft), 19.1mm (3/4") ID; spray 15.2m (50ft), 12.7mm (1/2") ID
Wand: Foam 178mm (7in) stainless steel, zero tip, ball valve; spray polypropylene spray gun, 25° fan tip
Suction line: 2.4m (8ft) clear hose, 6.4mm (1/4") ID (each system)
Pump seals: Santoprene, Viton or Kalrez
Mounting: Wall mounted
Part number: FISP-WC
Supplied with: Control box assembly, foam discharge hose and wand, spray discharge hose and trigger handle, alternate size fan tip for spray trigger handle, metering tip kit for foam injector, metering tip kit for spray injector, additional ultra-lean metering tip kit for spray injector, two stainless steel hose racks, mounting hardware, user manual
Chemical compatibility: Chemicals must be suitable for this application and compatible with the unit materials and pump seals. Check the chemical's SDS.