Shop popular
FOAMit Battery Powered Ultra-Low Volume Foam Unit
The FOAMit FI-BPULV is a 1 litre ultra-low volume foam unit powered by a 12 V lithium-ion battery, so there are no air lines or power cords. It draws pre-mixed solution and applies it as foam through a 1.4m tube and polypropylene trigger valve with an 80° fan tip, producing 1.6 l/min of foam from 0.3 l/min of solution.
The fast-charging battery gives up to 60 minutes of use per charge and recharges in 1 hour 40 minutes. A full tank lasts approximately 4 minutes.
For help choosing the right unit or seals for your chemical, call 015395 66193 or email sales@flowjet.co.uk.
Capacity: 1 litre
Power: Lithium-ion battery, 12 V DC
Chemical pickup: Pre-mixed solution
Products drawn: One
Output: 1.6 l/min of foam
Flow rate: 0.3 l/min
Battery: 1 hour 40 minutes charge time; input 12.6 V DC, 2 A, 25.2 W
Run time: Up to 60 minutes continuous per charge; approx. 4 minutes from a full tank
Electrical supply: Charger 100–240 V AC, 50–60 Hz, 1.5 A (GFCI-protected outlet)
Liquid temperature: 4.4–37.8°C
Discharge hose: 1.4m (4.5ft) tube, 6.4mm (1/4") OD
Wand: Polypropylene trigger valve, 80° fan tip
Nozzles: One
Pump seals: EPDM diaphragm, EPDM check seals
Height: 389mm
Part number: FI-BPULV
Supplied with: Foam unit, discharge hose with wand, user manual
Chemical compatibility: Chemicals must be suitable for this application and compatible with the unit materials and pump seals. Check the chemical's SDS.