Shop popular
FOAMit 10 Gallon Battery Foam Unit with Polypropylene Trigger Handle
The FOAMit FI-10N-B is a portable foam unit powered by a 12V SLA battery, giving up to 45 minutes of continuous use per charge. It draws pre-mixed chemical solution and applies foam through a 3.7m hose and polypropylene trigger handle with a 50° fan tip, with a reach of 1.5–1.8m.
Running without air lines, it suits areas without compressed air. The tool-free hinged back plate gives easy access to components, and the natural-colour tank shows the chemical level at a glance.
For help choosing the right unit or seals for your chemical, call 015395 66193 or email sales@flowjet.co.uk.
Capacity: 47.3 litres
Power: SLA battery
Chemical pickup: Pre-mixed solution
Products drawn: One
Output: 11.4–13.2 l/min of foam
Flow rate: Up to 3.8 l/min
Reach: 1.5–1.8m
Battery: 12V DC SLA, 8-hour charge time
Run time: 45 minutes continuous
Electrical supply: Charger only, 120V AC, 60Hz, 1A (GFCI-protected outlet)
Liquid temperature: 4.4–37.8°C
Discharge hose: 3.7m (12ft), 9.5mm (3/8") ID
Wand: Polypropylene trigger handle, 50° fan tip
Suction line: 9.5mm (3/8") ID
Pump seals: Santoprene, Viton or Kalrez
Wheels: 2 × 254mm (10") non-marking
Part number: FI-10N-B
Supplied with: Foam unit, discharge hose with wand, battery charger, user manual
Chemical compatibility: Chemicals must be suitable for this application and compatible with the unit materials and pump seals. Check the chemical's SDS.