Suttner ST168 easyfoam365+ Stainless Steel Foam Injector with Air Module

Overview

ST168 easyfoam365+ foam injector from R+M Suttner in stainless steel, with a compressed air module that gives a dry, stable foam even on low pressure systems. It works on high and low pressure systems and on mains water pressure of 5 bar. A lever switches between chemical and rinse mode. It is used for food processing, agricultural, vehicle and sanitation cleaning systems.

Because the foam is made at the injector, use DN12 hose and a wash gun with a 1/2" inlet and outlet so the foam does not collapse in the line. It is supplied with 10 nozzle inserts for setting the chemical dose. It has a 1/2" BSP female inlet and outlet and is rated to 80 litres per minute, 350 bar and 100°C. On vertical surfaces, apply foam from the bottom upwards. Made in Germany.

Specification

Compatibility

DN12 hose and a wash gun with a 1/2" inlet and outlet.

Sizing help

To choose the right nozzle size, see our foam nozzle size chart.

For technical advice or help choosing a part, call 015395 66193 or email sales@flowjet.co.uk.